Ключевые слова: power equipment, HTS, YBCO, tapes, FCL, current limiting characteristics, design, quench, resistance, power substation, fault currents, current waveforms, voltage waveforms, modeling, numerical analysis
Ключевые слова: thermosyphon, magnets, cooling technology, modeling, experimental results
Ключевые слова: Tokamak, coils toroidal, magnets, HTS, Bi2223/AgAu, tapes, current leads, design, design parameters, heat exchanger, heat transfer, heat loads, temperature distribution, modeling, numerical analysis
Ключевые слова: magnets, thermal conductivity, temperature dependence, LTS, NbTi, coils, RRR parameter, insulation, numerical analysis
Ключевые слова: medical applications, cyclotron, coils, displacements, design, modeling, magnetic field distribution
Ключевые слова: ITER, coils toroidal, current leads, prototype, design parameters, fabrication, HTS, Bi2223/AgAu, tapes, cooling technology, test results
Ключевые слова: motors, design, design parameters, HTS, REBCO, coated conductors, coils, stators, loads, cryogenic systems, levitation performance, modeling, numerical analysis
Ключевые слова: power equipment, HTS, YBCO, coated conductors, tapes, cables three-in-one, design parameters, modeling, current sharing, prototype, experimental results, current waveforms
Ключевые слова: MRI magnets, HTS, REBCO, tapes, coils pancake, winding techniques, insulationless, reinforcement, mechanical properties, stress effects, deformation, design, modeling
Ключевые слова: Tokamak, HTS, Bi2223/AgAu, current leads, design, design parameters, temperature distribution, resistance, RRR parameter, cryogenic systems, helium, flux flow
Ключевые слова: cyclotron, proton irradiation, medical applications, surface
Ключевые слова: HTS, YBCO, coated conductors, double-side structures, tapes, current leads, design, design parameters, fabrication, solder, joints, joint resistances, test results
Wang S., Jiang H., Chen W., Chen P., Zhu J., Guo T., Zhang K., Liu J., Ding K., Lu K., Dong Y., Du Q., Wei D.
Ключевые слова: power equipment, FCL resistive, FCL three-phase, HTS, YBCO, tapes, fault currents, quench current, resistance, high voltage process, recovery characteristics, test results
Mitchell N., Lee S., Yang Y., Bauer P., Taylor T., Heller R., Yamada S., Li J., Zhou T., Devred A., Ichihara T., Song Y., Huang X., Liu C., Liu C., Ballarino A., Ding K., Lu K., Gung C.Y., Spina T., Niu E., Han Q., Ran Q., Dong Y., Du Q.
Ключевые слова: ITER, current leads, HTS, coils toroidal, coils poloidal field, central coils, operational performance, design, Bi2223, tapes, prototype
Lee S., Yang Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Gung C., Ballarino A., Ding K., Lu K., Niu E., Fernandez A.V.
Ключевые слова: ITER, current leads, design, design parameters, fabrication, prototype, HTS, Bi2223, tapes, stacked blocks, LTS, NbTi, strands, test results
Bauer P., Wang J., Li G., Zhou T., Song Y., Huang X., Clayton N., Fang L., Wang C., Liu C., Liu C., Gung C., Ding K., Lu K., Niu E., Rol, Dai Z., Gong Z., Piccin
Ключевые слова: ITER, current leads, design, fabrication, insulation, discharge characteristics, high voltage process, measurement setup, test results
Ключевые слова: cyclotron, magnetic field distribution, angular dependence, LTS, NbTi, coils, geometry effects, design, numerical analysis
Bi Y., Li J., Chen Y., Song Y., Li L., Zhang H., Hu R., Ding K., Feng H., Du S., Zou C., Feng C., Lian H., Gen C.
Ключевые слова: medical applications, cyclotron, design parameters, coils, LTS, NbTi, fabrication, magnetic systems, quench protection, test results, coils insert, coils outer
Ding K., Zhou T., Lu K., Du Q., li B., Yu S., Huang X., Liu C., Zhang K., Jing K., Ran Q., Han Q., Li J., Xu L., Song Y., Zbigniew P., Kurt S.
Ключевые слова: ITER, central coils, magnets, current leads, HTS, Bi2223/Ag alloy, tapes, fabrication, test results
Ключевые слова: ITER, coils poloidal field, current leads, prototype, test results, HTS, Bi2223/Ag alloy, tapes
Mitchell N., Kim H., Ilyin Y., Chen L., Chen Y., Devred A., Clayton N., Gung C., Ding K., Lu K., Beemsterboer C., Farek J., Wen X., Man S., Naoyuki S.
Ключевые слова: bus bar conductor, ITER, joints, design, test results, feeder, heat loads, pressure drop
Lee S., Yang Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Huang X., Liu C., Ding K., Lu K., Feng H., Niu E., Du Q., Vergara A., Zhu S*1., Fernandez-Hernando L.
Ключевые слова: ITER, correction coils, current leads, HTS, Bi2223, prototype, fabrication, joint resistances, overheating, pulsed current, test results
Ключевые слова: measurement setup, cryogenic systems, test results, ITER, current leads, HTS, control systems, new, facility
Lee S., Yang Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Liu C., Ding K., Lu K., Niu E., Ran Q.
Ключевые слова: HTS, Bi2223, tapes, current leads, ITER, fabrication, test results, prototype, LTS, NbTi, cable-in-conduit conductor, joints, solder, heat exchanger
Ключевые слова: HTS, Bi2223/Ag alloy, tapes, stacked blocks, joints, current leads, design, design parameters, fabrication, heat exchanger, insulation, hybrid systems, magnets, temperature distribution
Ключевые слова: ITER, current leads, prototype, fabrication, design, design parameters, pressure drop, HTS, Bi2223, stacked blocks, LTS, NbTi, cable-in-conduit conductor, joint resistances, insulation, solder, heat exchanger
Ключевые слова: ITER, current leads, HTS, design, design parameters, heat exchanger, termination, LTS, fatigue behavior, welding, joint resistances
Mitchell N., Chen Y., Devred A., Song Y., Huang X., Clayton N., Liu C., Gung C., Cheng Y., Ding K., Lu K., Shen G., Feng H., Yu X., Sato N., Niu E., Pierre B.
Ключевые слова: ITER, feeder, China, review, status, HTS, current leads, joints, thermal properties, shields
Ключевые слова: HTS, current leads, Bi2223/Ag alloy, high field magnets, hybrid systems, fabrication, test results
Ключевые слова: HTS, current leads, test results, Bi2223, design, critical caracteristics, substrate Ni-V
Ключевые слова: HTS, current leads, Bi2223/Ag alloy, tapes, design, design parameters, overcurrent, accelerator magnets, experimental results, high field magnets
Ключевые слова: ITER, current leads, fabrication, HTS, Bi2223
Mitchell N., Bi Y., Bauer P., Zhou T., Devred A., Song Y., Huang X., Liu C., Gung C., Ding K., Shen G., Feng H., Ni Q.
Ключевые слова: ITER, current leads, HTS, Bi2223, stacked blocks, model small-scale, critical caracteristics, critical current, joints, quench properties, voltage drops, design, test results
Mitchell N., Yang Y., Bi Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Ballarino A., Ding K., Shen G., Foussat A.
Ключевые слова: ITER, current leads, design, HTS, Bi2223, design parameters, stacked blocks, heat exchanger
Mitchell N., Bi Y., Bauer P., Wang Z., Chen Y., Zhou T., Devred A., Song Y., Huang X., Gung C., Cheng Y., Ding K., Lu K., Shen G., Sahu A., Jong C., Dolgetta N., Ilin Y.
Ключевые слова: feeder, ITER, design, fabrication, termination, vacuum structure, cryostat
Mitchell N., Xi W., Bauer P., Zheng J., Zhou T., Devred A., Song Y., Huang X., Gung C., Ding K., Lu K., Niu E., Pan W., Tao Y.
Ключевые слова: ITER, feeder, high voltage process, insulation, test results
Ключевые слова: ITER, HTS, current leads, Bi2223, design parameters, termination, prototype, test results, fabrication
Sahu A.K., Bauer P., Bi Y., Chen Y., Cheng Y., Devred A., Ding K., Huang X., Liu S., Lu K., Mitchell N., Peng Y., Shen G., Song Y., Wang Z., Zhou T.
Ключевые слова: ITER, magnets, coils toroidal, LTS, NbTi, HTS, current leads, design, design parameters, feeder
Mitchell N., Bi Y., Bauer P., Wang Z., Chen Y., Zhou T., Devred A., Song Y., Huang X., Cheng Y., Ding K., Lu K., Shen G., Rodriguez-Mateos F., Sahu A.
Ключевые слова: ITER, magnets, design parameters, cryogenic systems, feeder
Bauer P., Bi Y., Cheng A., Cheng Y., Devred A., Ding K., Huang X., Liu C., Lin X., Mitchell N., Sahu A., Shen G., Song Y., Wang Z., Zhang H., Yu J., Zhou T.
Ключевые слова: HTS, current leads, ITER, Bi2223, tapes, test results, design parameters, current sharing, critical caracteristics, critical current, magnetic field dependence
Ключевые слова: HTS, Bi2223, tapes, ITER, quench protection, test results, current leads, safety
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.